Custom Lapel Pins & Collar Pins Singapore: Enamel Types, Plating, MOQ & Lead Times (2026)

Table of Contents

1. What Are Custom Lapel Pins and Collar Pins?
2. Soft Enamel vs Hard Enamel vs Offset Printed Custom Lapel Pins Singapore
3. What Plating, Sizes and Attachments Should You Specify?
4. What Is the MOQ and Lead Time for a Collar Pin Singapore Order?
5. How Do You Order Custom Lapel Pins Singapore in Bulk?
6. Why Choose Gift Hub for Custom Lapel Pins and Collar Pins?
7. Frequently Asked Questions about Custom Lapel Pins and Collar Pins in Singapore
8. Key Takeaways for Your Next Pin Order

If you need custom lapel pins or collar pins made in Singapore, you order them from a local corporate gifting supplier as a bulk, made-to-order item: choose the enamel type, plating, size and attachment, approve a digital proof, and take delivery in roughly three to four weeks. Gift Hub Singapore produces this kind of pin for companies, schools, uniformed groups and associations. Custom lapel pins Singapore buyers get confused because “lapel pin”, “collar pin”, “pin badge” and “enamel pin” mean one thing to some suppliers and four to others. This guide separates them and lists the specifications you must decide before anyone can quote you. Browse the full range of custom enamel pins as you read.

What Are Custom Lapel Pins and Collar Pins?

A lapel pin is a small metal badge worn on a jacket lapel, usually 15mm to 30mm across. A collar pin does the same job on a shirt or uniform collar and tends to be smaller and flatter so it sits against the fabric without pulling. Mechanically they are one product: a die-struck metal body, a coloured or plated finish, and a fixing on the back.

What matters for your order is construction, not name. A metal pin is stamped from a steel die, meaning a one-time mould charge and a crisp, permanent finish — the right call for staff identification in hotels, clinics and banks, for long-service awards, and for uniformed-group insignia. A button badge is a printed face crimped into a metal shell: no mould, far cheaper, but promotional rather than formal, which suits roadshows and conference delegates. Gift Hub quotes both, and the first question in any pin enquiry is which you need. For high-volume events, the custom badges range covers the same ground at a lower unit price.

Soft Enamel vs Hard Enamel vs Offset Printed Custom Lapel Pins Singapore

There are three ways to colour a metal pin. Soft enamel is the most common: colour is filled into recessed wells between raised metal lines, so you feel texture when you run a finger over it. It is the most cost-effective option and holds fine line work clearly, which is why most corporate metal lapel pins are made this way.

Hard enamel (cloisonné) uses the same wells, but the enamel is polished flush with the metal, giving a smooth, glass-like surface with jewellery-grade weight. It costs more and suits awards and anniversary pins that recipients keep.

Offset printing prints artwork in full colour onto the metal under a clear epoxy dome. It is the only method that reproduces photographs and gradients, so it suits detailed mascots and complex crests enamel cannot hold.

What Plating, Sizes and Attachments Should You Specify?

Three specifications decide how your pin looks and costs. Plating is the metal finish around the colour: gold, silver and nickel are standard, while black nickel, antique brass and rose gold suit premium branding. Match plating to the metallic elements already in your logo — a silver pin under a gold-toned wordmark reads as a mistake.

Size is measured across the widest point, commonly 20mm, 25mm or 30mm. Going below 20mm on a detailed logo is the most frequent cause of a disappointing sample: thin strokes and small text cannot survive the reduction, and enamel wells become too narrow to fill cleanly. If your logo carries a tagline, drop it for the pin version or go up a size.

Attachment is what holds it on. A butterfly clutch is the default and is secure for daily wear; a rubber clutch grips harder for active events; a magnetic back leaves no hole, so it is preferred for suit jackets and silk. Where staff need a name as well as a logo, custom metal name tags put both on one plate.

What Is the MOQ and Lead Time for a Collar Pin Singapore Order?

For die-struck metal pins, minimum order quantities typically start around 100 pieces per design. The reason is the mould: a steel die must be cut for your artwork, and that one-time tooling cost only makes sense spread across a meaningful quantity. Because the die is yours, repeat orders of the same design skip that charge. Button badges need no mould, so minimums are usually around 50 pieces.

On timing, budget roughly three to four weeks from artwork approval for metal pins, covering die cutting, enamel filling, plating, polishing and shipping into Singapore. Printed button badges are often inside one to two weeks. Add a few days for proofing, because nothing enters production until you sign off a mock-up. A collar pin Singapore order for a company dinner or National Day observance should start six weeks out to leave room for one revision. Confirm exact MOQ and lead time on your quote, since both shift with enamel type, plating and order size.

How Do You Order Custom Lapel Pins Singapore in Bulk?

The process is short if you arrive prepared. Send vector artwork — AI, EPS, SVG or PDF. A screenshot pulled off a website cannot be separated into enamel wells, and redrawing it adds days. State your quantity, enamel type, plating, size and attachment; if unsure, say what the pin is for and a supplier can recommend the combination.

You then receive a quote and a digital proof with colours called out as Pantone references. Check it against your brand guidelines, because the proof is what gets manufactured. Gift Hub delivers across Singapore and can hold stock for phased rollout. Many clients order pins alongside lanyards and card holders as one onboarding pack — our guide to lanyard printing in Singapore covers keeping branding consistent, and our enamel pins and badges bulk pricing guide breaks down the wider category.

Why Choose Gift Hub for Custom Lapel Pins and Collar Pins?

Gift Hub Singapore supplies the full pin and badge category rather than a single format, so the recommendation fits your use case rather than whatever one factory makes. The range includes Metal Lapel Pins Custom for uniform wear, Offset Printed Lapel Pins for gradient artwork, Hard Enamel Pin Badges for awards, and Custom Metal Name Tags Badge where a name and logo sit together. Bulk pricing, no GST and free local shipping apply. Get a free quote at gifthub.com.sg/pages/contact.

Frequently Asked Questions about Custom Lapel Pins and Collar Pins in Singapore

What is the difference between a lapel pin and a collar pin?

A lapel pin is worn on a jacket lapel, usually 20mm to 30mm across. A collar pin does the same job on a shirt or uniform collar and is typically smaller and flatter so it lies against the fabric. Manufacturing is identical, so Gift Hub quotes them as one product in different sizes.

What is the minimum order quantity for custom lapel pins in Singapore?

Die-struck metal lapel pins typically start at around 100 pieces per design, because a steel mould must be cut for your artwork and that tooling cost needs spreading across a reasonable quantity. Button badges need no mould and usually start lower, around 50 pieces. Confirm the exact minimum when you request a quote.

How long does it take to make custom enamel pins in Singapore?

Allow roughly three to four weeks from artwork approval for die-struck metal pins, covering die cutting, enamel filling, plating, polishing and delivery. Printed button badges are faster, often one to two weeks. Add a few days for proofing, since production starts only once you approve the mock-up.

Should I choose soft enamel or hard enamel for my pins?

Choose soft enamel for everyday corporate and staff pins: it is more cost-effective and handles fine line work well, with a slightly textured surface. Choose hard enamel for awards and anniversary pins that recipients keep, because it is polished flush to a smooth, jewellery-like finish, at a higher cost.

Can you print a full-colour logo with gradients on a lapel pin?

Yes, but not with enamel. Enamel fills flat colour into separated wells, so gradients and photographic detail are not reproducible. Those designs need offset printing, where artwork is printed onto the metal under a clear epoxy dome. Gift Hub offers offset printed lapel pins for logos enamel cannot hold.

What artwork file do I need to send for a custom pin?

Send vector artwork in AI, EPS, SVG or PDF format with Pantone colour references, because vector files can be separated into the individual enamel wells the factory needs. A JPEG or screenshot usually has to be redrawn first, which adds time and may lose fine detail.

Key Takeaways for Your Next Pin Order

Three things decide whether a pin order goes smoothly. Pick the construction before the finish: die-struck metal for uniforms and awards, button badges for high-volume giveaways. Match the colour method to your artwork — soft enamel for most logos, hard enamel for keepsakes, offset printing for gradients. And start early: six weeks out leaves room for one revision without a rush surcharge. Browse the full custom enamel pins and lapel pins range, then contact Gift Hub Singapore today for a free quote at gifthub.com.sg/pages/contact.